50 Scale fuselage model for SDX ・ Sceadu





 



 



 

0404-984 BLUE
  • Painted scale fuselage only for FREYA
  • Some assembly required.
  • Actual product may differ from pictures.


0404-990
 		 0404-989
 
 
 
 
 

New color is added for popular painted dauphin series !!

Fuselage length : 1,430mm Fuselage width : 270mm Total height : 460mm Main rotor dia : 1,550mm Tail rotor dia : 155mm (7 roters)
Gear ratio : 9.7:1:7.46 RC radio controller : 6ch. 7servo (Retractable randing gear;2 servo) Overall weight : 6,800g
dauphin2 ARF
(Coast Guard)
0404-995
dauphin2 ARF(Yellow Version)
0404-987

0404-986
dauphin2 ARF (Air Police Version)
 
 



HIROBO ORIGINAL FENESTRON SERIES No.3
 
0404-991 SWM system Main Flame Pipe Drive System ARF FRP Body (Not painted)
 
 
  • Fuselage length : 1,430mm
  • Fuselage width : 210mm
  • Total height : 330mm
  • Main rotor dia : 1,550mm
  • Tail rotor dia : 155mm
  • E/G : 70-91
You can open
   the DOOR

 
0412-955
30 SCALE BODY for Shuttle Plus
  • Painted scale fuselage for Shuttle Plus.
  • Some assembly required.
  • Actual product may differ from pictures.
 
 

 The first model by new frame.
 In addition to swash mode,
 compatible to two stage pipe drive
 by applying angled transmission
 in case of tail drive.
 Improved response to gyro.
 Assembled kit by FRP body frame.		 0404-980
  • Fuselage length : 1,550mm
  • Fuselage width : 520mm
  • Total height : 450mm
  • Main rotor dia: 1,550mm
  • Tail rotor dia: 275mm
  • Gear ratio : 9.7:1:5.38
  • RC radio controller : 4ch. 5servo
  • Overall weight : 6,500g

 Finally modeled since GAZELLE
 in 1976 using Fenestron!
 Retractable gears are standard.
 Assembled kit by FRP body frame.		 0404-981
  • Fuselage length : 1,430mm
  • Fuselage width : 270mm
  • Total height : 460mm
  • Main rotor dia: 1,550mm
  • Tail rotor dia: 155mm（seven rotors）
  • Gear ratio : 9.7:1:7.46
  • RC radio controller : 4ch. 7servo
    （2 servo for retractable gears）
  • Overall weight : 6,800g

 The first model by new frame.
 In addition to swash mode,
 compatible to two stage pipe drive
 by applying angled transmission
 in case of tail drive.　
 Improved response to gyro.　
 Assembled kit by FRP body frame.
 		 0404-982
  • Fuselage length : 1,500mm
  • Fuselage width : 410mm
  • Total height : 460mm
  • Main rotor dia: 1,550mm
  • Tail rotor dia: 155mm（seven rotors）
  • Gear ratio : 9.7:1:7.46
  • RC radio controller : 4ch. 7servo
    （2 servo for retractable gears）
  • Overall weight : 7,000g
 
Copyright Copyright © 1998-2012 HIROBO® Corp.  ---This contents requires InternetExplorer4.01 or later.---