| Code No. | Particulars | Q'ty | Remarks |
|---|---|---|---|
| 0404-722 | WC stabilizer band | 1 | Dia.3 punching process is required for WC99 specifications. |
| 0404-724 | WC vertical fin | 1 | Dia.6.6 punching process is required for WC99 specifications. (Dia.6.5 holes are appropriate the case of manual processing.) |
| 0404-746 | Dia.10 main mast P=195 L=220 (SUS) | 1 | |
| 0404-807 | SX cabin (carbon canopy) | 1 | Cabin only |
| 0404-808 | WC main rotor blade L=680 (carbon) | 2 | |
| 0404-810 | EX SSR-V rotor head assembly | 1 set | |
| 0404-811 | SSR-V damper rubber | 2 | Hardness 70 |
| 0404-812 | SSR-V blade holder | 1 | |
| 0404-813 | SSR-V feathering spindle L=48 | 2 | |
| 0404-814 | SSR-V seesaw | 1 | |
| 0404-815 | SSR-V thrust washer | 2 | |
| 0404-816 | SSR-V center hub | 1 | |
| 0404-817 | SSR-V stabilizer control arm | 1 | |
| 0404-818 | SSR-V yoke | 1 set | SSR-V feathering spindle pre-assembled |
| 0404-819 | Shock absorbing rubber sleeve | 4 | Shock absorbing rubber for vertical stabilizer |
| 0404-820 | EX floating angle set | 2 | |
| 0404-821 | SSR-V damper rubber | 2 | Hardness 60 |
| 2500-096 | Brg. Dia.9 X Dia.19 X 6.5H thrust | 2 | |
| 2509-013 | Needle pin 4 X 21 | 2 | |
| 2521-074 | Collar 13 X 16 X 2 | 2 | |
| 2522-009 | Ajust rod M2 X 70 | 5 | |
| 2522-011 | Ajust rod M2 X 90 | 5 | |
| 2538-001 | M3 X 10 countersunk screw | 10 | |
|
|
|||
| Copyrightｩ 2000 HIROBOｮ Corp. Any copy of these mentioned documents and photos to publishment should be prohibited. 2000.09.11 |
|||