This is the replica of the World Champion model flown by Manabu Hashimoto at the 1997 F3C World Championship.Based on the EAGLE2-EX, this superb competition machine
has been designed to the smallest detail to meet the new F3C rules put into effect in 1997.
Parts lists download HERE!!

Conversion set 0404-709
--WC Conversion set is the set of parts which converts Eagle 2EX to WC--
  • Main rotor dia:1,520mm
  • Fuselage length:1,430mm
  • Overall:4,900g
  • SuitableRC/4ch,servo x5（Sold separately）
  • Suitable engine/60class,Muffler（Sold separately）
※Included as a bonus in the WC conversion set are setup tips and intructions normally not made available for sale.

Parts lists download
  • Full lenge of fuselage/1,430mm
  • Full width of fuselage/245mm
  • Total height/460mm
  • Main rotor dia/1,520mm
  • Tail rotor dia/265mm
  • Gear raito/9.5:1:5.27
  • Full equipped weighr/4,500g
  • Raido controller/4-channel and 5-servo

Detail
98 SPEC.

Parts lists download
  • Full lenge of fuselage/1,430mm
  • Full width of fuselage/245mm
  • Total height/460mm
  • Main rotor dia/1,520mm
  • Tail rotor dia/270mm
  • Gear raito/9.5:1:5.27
  • Full equipped weighr/4,800g
  • Raido controller/4-channel and 5-servo

Detail
 98 SPEC.

･Servo mount-slide pitch up system is employed.
･Equipped FFR R/H with high stability.
･Each linkage incorporates full push-pull system.
･Famous among the helicopter enthusiasts in all over the world as a high performance helicoputer.

  • Main rotor dia:1,520mm
  • Fuselage length:1,330mm
  • Overall weight:4,600g

Tsurugi XX
0404-956　

More than 20 types of Hirobo optional parts are
available for the Tsurugi series helicopters.

This model's design was based on the SST Eagle 2 and is supplied complete with a TAS24cc petrol engine,pipe drive tail and 2.5mm duralumin side frames,Powerful and stable in flight.

  • Main rotor dia:1,520mm
  • Tail rotor dia:274mm
  • Fuselage length:1,330mm
  • Overall weight:4,600g
  • Gear ratio: 9.3:1:5.7（Engine:Main rotor:Tail rotor）
  • Engine:TAS24cc
  • Suitable R/C:4ch.,servo×5

0404-964


Instruction Manual (72dpi/877kB)
  • All you have to do is to put the decal on the surface ,since the body is already urathan painted in white and also the canopy area is painted in back.
  • Please purchase each 1 set of EX carbon tall boom brace '98 and WC brace holder, Collarφ3×8×7separately,since those are not included in this body set. (exclude WC spec and '98 spec)
 
 
0404-970(Blue)
0404-971(Red)
0404-972(Blue Painted) <-- Out of production --
[an error occurred while processing this directive]